 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
White Rogers Type 1311 Zone Valve to 3 wire thermostat, color coding request.
I have a White Rogers Zone Valve Type 1311 and a basic Three (3) wire non-programmable rotary thermostat (Red, White & Yellow). The White Rogers wiring diagram shows hooking one wire from terminal 4 to thermostat, one wire from terminal 5 to thermostat and one wire from terminal 6 to thermostat.
What are the wire colors associated with the terminal #'s 4,5, & 6? |
||||
Check out some similar questions!
I am trying to replace an older model thermostat with anew programmable one. Can this be done for a White rodgers model 1311-102 therostat?
I have an old White-Rogers thermostat with only 4 wires coming out of the wall and need to replace it but the only new ones I find (at Home Depot) have 5 wires. How do I hook up a 5 wire thermostat to 4 wires and still have it work properly? Big John
Installing cat5 data standard blue/white-blue, green/white-green, orange/white-orange, and brown/white brown but the wall mount I purchased has black, yellow, white, green, blue, orange, brown, and green. What color line do I connect Where?
I recently replaced the power head on a WR zone valve. The valve is working properly but since the change the heat, although hot, lacks any force coming from the base boards. I lost a small amount of water from the boiler when I replaced the valve and am wondering if I lost too much. If so how...
Hi there. I want to replace my current White-Rogers 1E56W309 thermostat with a new Honeywell RTH7500D. The problem is that the tools that installed my high efficiency furnace didn't install the wall plate with my thermostat (it was a new house and the builder contracted these guys). Instead,...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
