 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
What cause the split unit stay running after the thermostat wires are un hooked
This is a coleman furnace 7956c856 so the switchs are on the furnces itself and it stays running in the cooling mode after thermostat wires are off and away from the furnace eliminates shorted wires and the switch is in auto works for the heating side not for the cooling side both the indoor blower stays running and the outdoor unit is running
|
||||
Check out some similar questions!
It worked fine all summer until last few months. When I have it to cool it blows air but not cold air. Now that I want heat it blows cool air and not hot air. It took it 30 minutes to heat my 1000SF home from 64 degrees to 65 degrees. What could be the problem?
My older thermostat has a yellow, orange, brown, green, red, white, and black wires... the honeywell doesn't use all those wires. I hooked up the yellow to the Y, the green to the G, and the red to the RH with the jumper connected and the white to the W. I wrapped up the black, orange and brown. ...
Hello. I bought a house with central air, tried to start it up the other day, it ran, but the condenser fan would not shut off, only way to stop it was to pull the disconnect outside. I removed the cover and found the contactor, it looks to be in pretty good shape. Someone tie-wrapped something...
The unit is a 1988 or 89 lennox g12 conservator unit and its wired incorectly I need to know how to wire from the tsat to the transformer. Also I don't see a circuit board.
I have a bryant furnace with AC system. I turned the system on for the first time this year & it didn't run. We didn't use it at all last year, but worked fine the year before. The 3 amp fuse on the furnace control panel was blown. I traced the problem to a short in the 2 wires between the...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
