Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Wiring a honeywell L641b 1004 pipe stat with a normal air monitored frost stat
[ 0 Answers ]
I have a garage located boiler with a typical frost stat above it .I have a honeywell L641b 1004 pipe stat that I wish to monitor the return to boiler . If possible I would like to wire it so that the system fires up on hot water and not heating , I hope this makes sense.. I have a y plan..
2-wire hook-up from a Carrier stat to a 3M30 Filtrete stat?
[ 0 Answers ]
Ok what I have is a Carrier {edge}. Removing it to install a Filtrete 3M30. I have two wires coming from the wall. One white & one red. The back plate to the Carrier has a 4-wire hook-up. From the wall wires red go's to V White go's to Vg Then there are two wires coming from the back of the...
Want to upgrade to high speed but don't have wireless capable computers.
[ 6 Answers ]
I am looking at upgrading to high speed internet / DSL but we have 3 computers in the house and only 1 is wireless capable. We've been using dial up and are fine with using the phone line. What is the best option for high speed internet via a phone line/plug in rather than upgrading 2 of our...
Lennox 51M33 stat to Hunter 44860 stat
[ 4 Answers ]
Lennox Heat Pump with Electric heat backup Lennox 51M33 wiring O - orange R - red G - green Y1 - yellow W1 / E jumper - white L - light red (pink) C - black T (Outdoor temp sensor) - blue
Just 3 wire T-Stat connection, new stat, diff letters
[ 6 Answers ]
Hi all, I've done tons of reading and can't find my specific wiring, tstat combo to figure it out... hopefully someone can shed some light on it for me. Natural gas forced air furnace, no air conditioning. Had a honeywell for the last 9 years, easy install, labelled easy. (but its dead) Wire... View more questions Search
|