Ask Experts Questions for FREE Help !
Ask
    Handianni's Avatar
    Handianni Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 12, 2012, 04:03 PM
    Troubleshooting a Intertherm Furnace
    Our Intertherm furnace in seems to be on a short cycle, running more often than would seem necessary. Any ideas?

Check out some similar questions!

Intertherm furnace troubleshooting [ 11 Answers ]

Having problems with our intertherm lp furnace. It runs for a while and then it kicks out the high limit reset on the purge blower fan. Then we shut the furnace off and reset the high limit switch button on, and it comes on again. We currently have the thermostat set at 67, if we increase the...

Troubleshooting a Intertherm Furnace? [ 2 Answers ]

On the hot serface ignition down by where the wires go in there is a flashing red light coming from I believe the blue wire, and the furnace won't start

Intertherm Furnace Troubleshooting [ 0 Answers ]

I need the Fused Disconnect that works on Interthem Furnace Model FEH-015HA-04 w/Serial #FEH-9-02378

Intertherm Furnace Troubleshooting [ 0 Answers ]

Intertherm model E2EB-015HA Was working fine then overnight it got nice and warm in house and the next morning nothing works.Put new batteries in wall thermo checked all breakers,Went out to heat pump and pushed in on contacter and outside unit comes on.no fan by itself or anything.

Intertherm furnace troubleshooting [ 2 Answers ]

My intertherm #e2eb-01sha electric furnace mostly just blows cold air. Sometimes however the heat works just fine. Also, anytime the blower is not running the furnace is hot so we have to turn off the safety disconnect. We have tried replacing the thermostat to no avail. Help please Michael

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.