My furnace is blinking 3 times and won't turn on. I have a Trane XR80 and no manual or trouble shooting codes. Could somebody please tell me what it means when it blinks red 3 times and won't turn on? Thanks... very cold:confused:!!
Add your answer here.
Check out some similar questions!
Trane XR80 Furnace will not stay lit [ 10 Answers ]
Hi all, I have a 6 year old Trane XR80 furnace that will not stay lit. It will light for about 2-3 minutes than will go out. It will stay out until the system is turned off for a significant amount of time. The filters are new and I have cleaned the burner parts. What other things can I check?...
Trane XR80 Furnace Open High Limit Device [ 16 Answers ]
I have a Trane XR80 furnace that has an LED flashing 4 times--Open High Limit Device. The filters are new and clean, I replaced the high limit switch, cleaned the flame sensor. Are there other switches I could check? Any other ideas? Thanks for any help or ideas. Brian
Electric TRANE XR80 won't come on [ 1 Answers ]
My tenant is trying to turn the furnace on for the first time this fall. She can get the blower to blow out cold air, but not hot. I told her to turn the (digital) thermostat to "off" and to leave it off for a bit. Then to turn it to "heat". She says when she does that it just blows out cold...
Furnace Trouble shooting [ 1 Answers ]
I have an Coleman Evcon Furnace. Model #15020A the problem is I replaced the Inducer motor, and The furnace starts like normal but then the flames goes out after about a minute or two. The LED light says the Pressure switch is stuck open but it seems fine. I tried to replace the PC board but can't...
Trouble shooting GMP Furnace [ 1 Answers ]
I have a gmp075-4 gas fired furnace, I just replaced the gas valve and the thing starts up fine but when the burner fires and the hot bar goes out the burner goes out any ideas? Limit switch maybe ?
View more questions Search