Ask Experts Questions for FREE Help !
Ask
    jr32bask's Avatar
    jr32bask Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Apr 18, 2009, 08:45 AM
    Transformer
    I have a transformer that is 120/24 one side of the transformer going to the board is reading 24 volts like is supossed to the other side going to the control board is only reading 8 volts I don't know what the problem is
    sathe1963's Avatar
    sathe1963 Posts: 97, Reputation: 4
    Junior Member
    		  
    #2

    Apr 18, 2009, 08:58 AM

    Whether the transformer is on load or what?
    How much is the distance between the board and transformer? What is the capacity / rating of the transformer? What is the size of cable used between the transformer and the board?
    You may find your answer / remedy out of above questions / queries. Thank U.
    dwayne23's Avatar
    dwayne23 Posts: 6, Reputation: 1
    New Member
    		  
    #3

    Apr 19, 2009, 04:17 AM

    Agreed, check the wires. You could have a short to ground in your low voltage system.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

24 V Transformer Bad, No AC [ 2 Answers ]

One hot Summer day, My Central Air went out, but the fan continued to run even when the thermostat was turned off. The smell of burnt electrical wiring throughout the house. I removed the front cover of the air handler, unplugged the 120 VAC power cord and When I checked the circuit it was...

Where is the transformer? [ 1 Answers ]

Hi, Thanks for the reply to my previous message. Can you tell me where I can locate the transformer to hook up the common terminal?

Transformer [ 3 Answers ]

What happens inside a transformer that increases or decreases the voltage?When a transformer steps up voltages,from where it creates thes voltages?

AC Transformer [ 6 Answers ]

Where is the Transformer for a home AC unit by Carrier Model #FA4BNF042?

Transformer [ 1 Answers ]

I have a Goodman Heat Pump. The transformer in the air handler burnt out and I replaced it with one protected with a reset button. Now, when I use unit, I can only use in emergency heat. When I use in heat or cool mode it will trip the transformer in 30 seconds. Is this a low voltage problem? Air...

View more questions Search