 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Trane xl 1200 high speed fan inop
I have an older trane xl 1200 and it appears that only one fan speed is working on the outside unit. If my memory serves the unit does have a 2 speed system. The low speed appears to be the only one working. How can I troubleshoot it and repair it?
|
||||
Check out some similar questions!
I have a newer xv80 trane furnace, live in CO, and have had issues with the upstairs bedroom not warming up (there is no cold air return in the room). I looked at the dip switches and put my fan up to high from medium low factory setting. At first I thought the air was blowing the heat "faster"...
My blower fan has 4 wires but unit has 3 the high speed wire from blower has nowhere to go what do I do because we have very low air flow
I have a lennox 2 speed condensing unit that is 25 yrs old and had very little problems with it. I cut the unit on last week and nothing. I took the panel off the outside unit to ck to see if I had voltage at the transformer and voltage coming from the house all good. I pushed the contactor in for...
Hi. I have a Trane XV90. I keep the fan running all the time, as was recommended with the DC variable speed motor in this model. When not in heating or cooling mode, the fan runs at 30% to keep the system pressurized and the air moving. My question is, does anyone know how to kick the fan speed...
I reinstalled a ceiling fan from the basement. When it was down there all 3 speeds worked fine. Now that I've reinstalled it upstairs, it only runs on high speed. The are 4 wires from the fan, white black blue and green. Green is ground, blue is for the light, white neutral and black hot. 3...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
