Ask Experts Questions for FREE Help !
Ask
    ericouyang's Avatar
    ericouyang Posts: 1, Reputation: 1
    New Member
     
    #1

    Feb 3, 2017, 07:15 AM
    Trane xe70
    Hi, I have a Trane XE70 furnace and the model is TDN090A948A1. If you look at the page 1 of this link, http://www.emersonclimate.com/en-us/.../0037-5034.pdf, my Trane XE70 is using exactly the same parts (1) mercury flame sensor (2) 36E86 gas control (3) E51-15 electrode assembly (4) 5059 pilot re-light control. I want to throw away (1), (2), and (3), but I will keep (4), since it is still working well. Actually my old (1) and (2) and (3) were all coupled together, and that is the way how they work. I decide to replace all these 3 parts because mercury flame sensor is an old technology (but I do not want to replace my entire furnace because it costs too much) I want to replace (1) and (2) and (3) with newer and fit parts, and I like to consult with you if you can suggest me good new ones? Many thanks
    talaniman's Avatar
    talaniman Posts: 53,994, Reputation: 10852
    Expert
     
    #2

    Feb 3, 2017, 09:10 AM
    You should call the manufacturer first, and see if such a project is even feasible. I see they have a replacement parts list for your model, and may even have the proper parts for your upgrade. Be aware that cross manufacturer parts replacement takes a knowledge of the specs and compatibility which can be quite extensive and expensive. You can also get a PDF, for a newer model furnace for part comparisons, and compatibility, to guide you as you gather your information.

    Once you have those parts either call or go online to locate them, being mindful of the performance record of not just the manufacturer of the part but the reliability of the seller. Start with upgrading your mercury sensor and see what else it involves.

    https://www.trane.com/residential/d/...FUsvgQodKqoImg

    Call us at 1-844-359-4864.

    Available daily from 8 a.m. to 6 p.m. CST.


Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Trane xe70 blower fan won't come on [ 0 Answers ]

Blower fan does not always come on . The furnace ignites fine, but blower doesn't always engage. What up? Could it be a faulty door switch . If I kick lower panel it will engage

Trane XE70 furnace issues... [ 0 Answers ]

I have a Trane XE 70 forced air furnace that has recently refused to stay running. Model Number TUS100A936A1 I think it's has a faulty gas valve, but I need advice. The Trane gas valve model number is 21c138785P03 which I believe is the same as White Rogers 36E87 204. It's valve uses a socket...

How to wire a trane 900 series thermostat to a trane XL13i heat pump [ 1 Answers ]

How to wire a trane 900 series thermostat to a five wire XL13i heat pump system.

Trane XE70 won't light [ 0 Answers ]

Trane XE70 won't light. When I turn the furnace on I hear a click then in a second or two the gas comes on but there is no clicking by the igniter or glow or pilot flame. The gas stays on for only a second or two. Then nothing. If I turn the power off and back on the same thing happens.

Trane xe70 won't light [ 4 Answers ]

I have a trane xe70 that would light for about ten seconds and then blow cool air. So I cleaned the flame sensor now it won't light at all but ignitor does glow, but I don't here any gas. Help please


View more questions Search