Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Fireplace insert blower auto shutoff not working and damper rod vibrating
[ 6 Answers ]
I bought a Hampton Fireplace insert about 6 years ago and had it installed in my fireplace that until then, had glass doors. The insert has worked wonderfully in my house except for two things: 1) the damper rod vibrates and it constantly needs to be adjusted in order to quiet it down. It's very...
Trane xv90 blower motor doesn't. Motor is free, unit is 7 years, not t-stat. Thanks
[ 2 Answers ]
I believe I have troubleshot this down to either the blower motor or their Integrated Controller board. 120VAC to motor OK but too many other wires from board to motor for motor control to test (variable speed) without advice or a manual. Motor is rated for 100% duty cycle and has only been run...
Fan Motor or Blower Motor? Trane XB80
[ 0 Answers ]
Outside fan motor clicks and hums - are the fan motor (outside) and blower motor (to circulate the air) tied together? i.e. if one is out, neither will work? If so - how do you diagnose which motor is out? This is on a Trane XB80 Furnace & Air Conditioner
Blower motor to loud
[ 0 Answers ]
Lound blower motor & should the fan cage have play in the shaft.I"m able to move shaft in & out about a 3/4 inch.. is that making the loud vibration & huming noise
TRANE XL80 blower stopped turning
[ 1 Answers ]
Hi I have a TRANE XL80 Furnace. Couple of days ago the furnace “Blower” started to make humming and grinding noise and it wouldn’t turn. I then would give it a push start by turning it by hand, and it would turn for couple of hours and it would do the same thing. An hour ago, it stopped... View more questions Search
|