Ask Experts Questions for FREE Help !
Ask
    WaterWings's Avatar
    WaterWings Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 23, 2012, 04:36 PM
    trane variable speed air handler troubleshooting
    Unit is about 16 months old and has been working nicely. From my past experience I constantly monitor the outside drian and periodically shop vac the line to assure it remains clear. About 10 days ago the pan was full and the system shut down. I drained it and the unit started up. The next day a small leak started in the ceiling. The water was leaking from the output plenum. I called my technician and he opened the unit. The internal insulations had come loose and the inside was like a rain forest. Since then we have checked for level and the water seems to be contained inside the airhandler however, there is so much water that I now have to vaccuum the pan daily. Why am I getting excessive water and what can I do?

Check out some similar questions!

Should I get a variable speed air handler or single speed? [ 4 Answers ]

I'm looking into getting a new heating unit - I'm looking at 2 options - the single speed - standard model - and the 2 stage variable speed model- it's a little over a $1,000 difference - but I keep hearing about the variable being worth it - I have a single story home 3 bedroom - I'm adding...

Variable speed on York Air Handler [ 1 Answers ]

I have a york air handler (no heat pump) and I have the motor on low (just have to move a wire to change from L,M,H) I was wondering if changing the motor speed to Med or High might help move the air better and make up for better efficiency and help not to be so cold in here at night. I just...

Trane XL16i, Variable Speed Air Handler, 803 thermostat [ 3 Answers ]

We purchased this unit about 8 weeks ago and it's been nothing but a headache. Trane's field rep came out Friday with the installer and they gave the unit a complete going over. Checked duct work, everything. Even replaced the thermostat. Was assured everything was mechanically correct. The...

Replace air handler with variable speed [ 1 Answers ]

I want to know if I can replace a standard air handler on a 5 ton system with a variable speed air handler without replacing the outside unit. The electronics on the air handler will be different but does the compressor work full time or not.

Prob. Variable Speed Air handler [ 2 Answers ]

A Trane XL14i heat pump was installed 6/8/05. The variable speed air handler fan only runs at full speed or off, but not slow when demand is low. The dealer's tech has replaced 2 electronic modules, to no avail. He can't seem get expert advice from Trane. I would greatly appreciate any advise to...

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.