Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Trane XL20i heat pump requires Trane 900 series thermostat?
[ 2 Answers ]
Hi, I was wondering if the Trane XL20i heat pump requires the use of Trane's 900 series thermostat or if a Honeywell VisionPro IAQ thermostat can be used.
Trane heat pump issue
[ 7 Answers ]
We have a Trane system, a bit over 10 years old. Bought home last year. Has older thermostat. Running heat now as it's winter here, but noticed that sometimes, the system begins to start, then immediately stops. After checking things, it appears this happens even when the thermostat is off. ...
Trane xl 1100 heat pump
[ 11 Answers ]
I have a trane xl 1100 heat pump split system the outside fan shuts off for no reason all readings are good I have tried 3 different motors with blades that were the right size but still runs about 20 minutes than shuts off, the compressor keeps humming I have had 2 techs look at it but have no...
Trane Heat Pump
[ 6 Answers ]
I have been working on a Trane Heat Pump and the problem I'm having is the thermostat won't engage the compressor for heat, but it does on cooling mode, and in fan only mode. I jumped the thermostat at RH and G and the unit kicked on. I have replaced the thermostat and still it does the same...
Trane 1200XL heat pump
[ 4 Answers ]
Hey Folks, I have a Trane 1200XL heat pump and every once in a while when the unit cycles on, the condenser fan and compressor won't go on but I hear the unit humming. After 30 to 90 seconds later, the condenser fan and compressor kick on and everything is OK. I tried replacing the... View more questions Search
|