 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Trane ac electric heat unit trips breaker
I have a Trane A/C split unit with electric heat. Turn on the heat and it runs for 3-5 minutes then trips the 60 amp breaker. Removed the heat strip and inspected with no visible problems to the coils or connections. Wiring is #10 and looks to be in good shape. Where else can I look to resolve and can I be sure with visual inspection or is there a test I can do with the heat strip to assure it is good. It was manif. 5/2006 and is a BAYHTR1410 strip.
|
||||
Check out some similar questions!
When the thermostat kicks the AC on the unit outside comes on for 2 seconds then trips the breaker. The blower inside the house stays on but because the compressor outside isn’t running it just circulates the warm air. The AC unit is on a 30 amp breaker switch so I believe that is large enough to...
The central heating unit comes on and heat for about 20 minutes then the breaker trips off if I reset the breaker the unit comes on but there is no heat
Heat will only run about an hour after turned on and then the breaker trips.. :confused:
The air conditioner works fine. When put in to the heat mode the out door unit trips outs on high head pressure but the indoor fan still blows. Why?
I have a Carrier Central Air Unit, last night the vents started blowing warm air. The blower in the basement was obviously working so I went outside to find that part of the unit not operating. I went to the breaker in the basement to find it tripped. I turned off the ac unit at the thermostat and...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
