Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Common wire for thermostat and aquastat relay
[ 10 Answers ]
I just purchased a totaltouch P286-1300 which I know is a little bit of over kill for my system, but I like the way it looks. Anyway, I just a simple two wire baseboard gas heating system. When I connect the wires the screen lights up and comes on just fine. When I use the system the thermostat...
Thermostat and relay ?
[ 2 Answers ]
I have 2 wire thermostat controlling a window ac using 220 v . I replaces the burnt out 24v transformer . The AC worked but when I turned of the thermostat and then turned it back on the new transformer heated up and stopped working again . I replaced it again and the new one also burnt out . (3...
Thermostat Compressor relay
[ 1 Answers ]
An AC technician serviced my unit today and told me my compressor was cycling (turning on and off) too quickly. He suggested I change out my thermostat, which I did last January. I installed a Honeywell RTH 230B. I can't find any info as to whether it has a compressor relay or anything else that...
AC relay
[ 1 Answers ]
I have a Magic Chef forced air furnace/ac (gas heat, elec ac) Model #G8A75DC42-17 and the fan stays on even after the ac turns off. I had an ac man out and they said the relay was bad but the unit is older and they could not get replacement parts for it. When I look at it, there is a little black...
RTH230B Thermostat A/C Relay Not Working
[ 3 Answers ]
I have read several postings on here about this subject, but have not really found the answer to my problem. I am having similar trouble with my relatively new RTH230B Thermostat (Mainly the A/C won't work properly). I installed it this past fall and my gas furnace worked like a charm. However,... View more questions Search
|