Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Thermostat Wiring Question
[ 1 Answers ]
While installing a new thermostat I accidentally attached the blue wire (common) to the heat damper terminal on the thermostat. It is a common 5 wire set-up with red being hot, white being the heat relay, the yellow being compressor contact and the green being the fan. I lost power to the...
Thermostat wiring question
[ 1 Answers ]
OK, I have an old thermostat that needs to be replaced. Just to be thorough, the old thermostat is a Goodman mod #HPTD18-60. It's a 24v line that controls both heating and cooling and has a multistage heat pump. The new thermostat is a honeywell RTH7400D. The old thermostat uses the...
Can anyone help with a thermostat question?
[ 1 Answers ]
I have Coleman central air unit and electric furnace, it came with a Coleman 7900-7541/a TYPE 1C26-118 thermostat hooked up to it, it has a white,green,yellow,and red wired hooked up to it, there is a blue wire there but it is not hooked up. I am trying to hook up a digital programmable Honeywell...
Thermostat question
[ 1 Answers ]
I Have A New Honeywell thermostat that I just installed. And all of the colors are matched up it seems but my air handler will not shut off with my outside unit? And I have replaced the air handler electrical-contactor.
Thermostat Wiring Question
[ 1 Answers ]
Thanks in advance for your help... I just purchased a large older home, and I want to replace the thermostats. They are Honeywell Chronotherm III's and the digital display's are impossible to read. I'm thinking of replacing them with Hunter AutoSaver 550's. The house has a hydro air system,... View more questions Search
|