 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Thermostat Problems. Set temp doesn't seem to be working
I have a BesTech BT110D Digital Non-Programmable Thermostat that is 3 months old. Just started noticing that the set temp for the heat seems to not be working. I set the set temp for heat at 70 degrees and unit does not shut off. I have watched the set temp light go off when it hits my set temp and the thermostat makes a clicking noise but the heat keeps climbing until 80 then I end up having to turn from heat position to off position then it shuts off after 20 seconds or so. Anybody have any ideas as to why it is doing that. Maybe just a cheap thermostat went bad already. It does have a year warranty so.
|
||||
Check out some similar questions!
My furnace model# is concord 90 High eff c2e24b-24, The thermostat call for heat the burner comes on for 15 sec and goes off. This happens 6 or 7 times and it shuts off. What should it do to correct it
Coleman evcon presidential furnace... heat runs but doesn't get to temp set on thermostat... ie. Thermostat is set at 71 and only runs to 66 then starts cool down faze. Restarts within muntes and sometimes during cool down faze
Hello, I Was Wondering If Anyone Can Help Me With This: I Changed The Location Of The Thermostat From One Side Of The Closet To The Other. I Did Not Moved The Cables As They Were Still In Range. I Also Made Sure To Keep The Same Color Of Wire With The Same Input. When I Turn It Back On The Screen...
I've got a Beckett oil heat water on demand furnace that heats through baseboards. Since this past weekend the furnace hasn't been kicking on when the temperature drops below my set temp of 68 degrees. I have to go down to the furnace and simply touch the top of the reset box for it to kick on. ...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
