Ask Experts Questions for FREE Help !
Ask
    boscomom's Avatar
    boscomom Posts: 1, Reputation: 1
    New Member
     
    #1

    Jan 11, 2010, 05:17 AM
    Thermostat Not Triggering Furnace
    My thermostat has always worked just fine, however in the past few days I have noticed that it felt chilly so I check the temp and its lower than my setting (i.e. set for 68, current temp 66). In order for the heat to turn on, I have to turn the thermostat off and so far that corrects the problem, triggering the furnace. However, it is now happening more frequently so it's becoming a problem.

    Suggestions? I'm thinking I either need a new thermostat or perhaps a check to the wiring.

    On a sidenote, I would like for the thermostat face to be flush with the wall, is it okay for the thermostat to be inset into the wall or with this interfere with the functions?

    Thanks in advance and if you answers could be in layman (or better yet, laywomen : ) terms, that would be great.

Check out some similar questions!

Wiring a furnace thermostat to manually operate the furnace fan [ 2 Answers ]

I have two wires connected to my furnace thermostat. There is a place labeled G on the thermostat. Can I simply run a wire from the G terminal on my thermostat to the terminal labeled G on my furnace fan relay to operate the fan separately?

Goodman furnace guso50-2 thermostat wiring instructions for 2 wire thermostat [ 2 Answers ]

Looking to hook up a 2 wire heat only thermostat as the door with the weiring diagram is missing it's a goodman guso50-2?

Add on coal/wood furnace thermostat wiring for 2 zone house with oil furnace [ 1 Answers ]

I purchased a Harman wood / coal furnace model SF-2500 (forced hot air system) and am tying into my existing forced hot air oil furnace 2 zone system and do not know how to tie into the existing thermostats and zones. I wish to still use the 2 separate zones for the bedrooms and the main body of...

Applying for a US Passport Triggering an Audit? [ 3 Answers ]

Hello, I hope this email finds you well. Firstly, I wanted to thank you for the informative article I found online. Good information is always appreciated ;] Secondly, I have a quick question and am unsure who to ask. I realize that you cannot provide definitive advice or a free...

Thermostat turns on furnace and then thermostat shuts back to HOLD [ 7 Answers ]

I believe that when we re-run the program with the correct date and time, if the temp has to go up, the furnace runs until it gets the appropriate temp, then it turns off and when it does that, the thermostat also turns off going to the HOLD state.:confused:


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.