I have a Honeywell programmable thermostat and the display is blank. We had a bad storm and the power went out. I have checked the breaker and reset it. The blower will come on when I switch it to ON, but nothing else works. Can someone help?
Check out some similar questions!
Programmable thermostat went blank [ 12 Answers ]
Our thermostat (which has been serving solely as a thermometer since the last time we used the heat in the spring) blanked out yesterday afternoon. I checked the inside temp. during the day, then last evening the face was completely blank. It is completely unresponsive to any button pushing. I...
Blank Thermostat [ 6 Answers ]
Hi Guys, I had the A/C unit running fine today... then all of a sudden my thermostat went blank... It was raining on and off today here in Plano, Texas... It is a Carrier A/C furnace unit, controlled by a Honeywell Thermostat... This thermostat gets its power from the unit itself... In the...
Honeywell digital thermostat dead/blank [ 2 Answers ]
No flashing or blinking lights or numbers. No read out at all on thermostat. No batteries, it bleeds power off the furnace I believe. York natural gas furnace. I checked the breakers, they are all on. The pilot light is on. This has happened before, about 2 weeks ago. I had a service guy...
Thermistat display goes blank and comes back intermittently. [ 2 Answers ]
I have a Bryant (Carrier) programmable thermidstat that has worked without problem for 2+ years. The problem is that the LCD and backlight goes out intermittently during the time the system is not running. I have yet to determine the exact sequence of when this happens but without intervention the...
View more questions Search