Ask Experts Questions for FREE Help !
Ask
    rep1093's Avatar
    rep1093 Posts: 2, Reputation: 1
    New Member
     
    #1

    May 25, 2008, 10:04 AM
    Thermostat change from White-Rodgers 1F78H-144 to Hunter 44660
    Hello,
    System is gas heat, no heat pump, air
    Trying to install new Hunter 44660 thermostat

    Old White Rodgers Wiring
    W- white wire
    RH RC Jumper on
    RC- red wire
    B-nothing
    C-blue wire
    G-green wire
    O-nothing
    Y-YELLOW

    I've wired the new Hunter Thermostat as:
    Y1-nothing
    RH-RC jumper on
    RC- red wire
    YO-yellow wire
    WB-white wire
    G-green wire
    The manual says if a C wire was present- do not use it - so I didn't

    The thermostat says the fan is running but it isn't. What should I change?
    Any help is appreciated.
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
     
    #2

    May 25, 2008, 05:19 PM
    Start by getting a quality Honeywell/White Rodgers thermostat.
    Hunter is junk.
    rep1093's Avatar
    rep1093 Posts: 2, Reputation: 1
    New Member
     
    #3

    May 25, 2008, 07:53 PM
    Spot on advice. I took it back. Thanks for taking the time to reply. Much appreciated.
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
     
    #4

    May 25, 2008, 09:20 PM
    My thoughts exactly,, hvac1000

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Changed over from White Rodgers Thermostat to Honeywell thermostat [ 3 Answers ]

I have a White Rodgers 2 stage heat/1 cool model 1F58-58 heat pump thermostat that I have changed over to a Honeywell programmable thermostat model RTH7400. Did all the correct wiring as stated in the books but when set to cool, the heater kicks on instead of the central air conditioning. What...

Changing over from White Rodgers Thermostat to Honeywell thermostat [ 3 Answers ]

I have a White Rodgers 2 stage heat/1 cool model 1F58-58 heat pump thermostat that I want to change over to a Honeywell programmable thermostat model RTH7400. I need help in trying to figure out the wiring part of this whole thing. Can someone out there please help. I would certainly appreciate...

How to connect thermostat Hunter 44660 coming from White Rodgers 1F58-72 [ 2 Answers ]

I just typed this and lost it through some Firefox glitch so typing it all over again. I just disconnected my old White Rodgers Type 1F58-72 Thermostat which had the following connections. Red - R White - W2 - Auxiliary Heat Relay Blue - B - Reversing vale energizes during heat Yellow - Y...

White Rodgers to Hunter Thermostat [ 2 Answers ]

I currently have a very old White Rodgers thermostat with large push buttons at the very top. I want to replace it with a Hunter Model 44260. Here is the current configuration -------------------------------------- red <= Don't know if RED goes to RC or RH white green yellow

White-Rodgers to new Hunter Thermostat (Wiring Help Please) [ 4 Answers ]

Hello, I have a new home, built in 2003, with Central Heat and Air. It's all run off electricity and is using a Lennox Model CB29M-41-1P heat pump. The WHITE ROGERS DIGITAL HEAT PUMP THERMOSTAT 1F89-211 used the following wires: White Red Brown Orange Yellow


View more questions Search