Ask Experts Questions for FREE Help !
Ask
    fordman66's Avatar
    fordman66 Posts: 2, Reputation: 1
    New Member
     
    #1

    Feb 6, 2010, 06:20 PM
    Thermostat Change
    I am replacing a 5 wire Honeywell digital heating & cooling thermostat with a Hunter 7 day programmable thermostat. The letters on the terminals are not the same. Does any one have a conversion chart?
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
     
    #2

    Feb 6, 2010, 06:37 PM
    From a Honeywell to a Hunter is a mistake. Hunter in my opinion is not a good thermostat!

    As far as changeover all you need to do is follow the directions that come with the thermostat. OR You can post the terminal letters available for each thermostat along with the EXACT model of each thermostat. Also post the brand and EXACT Model number of your inside unit and state if gas or electric. I will look at the information and see what wires go where if possible.
    fordman66's Avatar
    fordman66 Posts: 2, Reputation: 1
    New Member
     
    #3

    Feb 6, 2010, 07:21 PM
    The Honeywell is a model T8401C with terminals: W=white wire, Y=yellow, G=green, R=red and C=blue. The Hunter is a model 44660, with terminals: Y1, RH, RC1, RC,Y/O, W/B, and G. The furnace is oil forced air with airconditioning. Thank you

    Quote Originally Posted by hvac1000 View Post
    From a Honeywell to a Hunter is a mistake. Hunter in my opinion is not a good thermostat!

    As far as changeover all you need to do is follow the directions that come with the thermostat. OR You can post the terminal letters available for each thermostat along with the EXACT model of each thermostat. Also post the brand and EXACT Model number of your inside unit and state if gas or electric. I will look at the information and see what wires go where if possible.
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
     
    #4

    Feb 6, 2010, 08:52 PM
    Here is the factory manual for your old thermostat. You have the new manual for your old thermostat. It should now be easy for you to do the change over.

    http://customer.honeywell.com/techli...0s/69-1483.pdf


    Here is your new manual

    http://www.hunterfan.com/uploadedFil...(3).pdf?n=6536

    Make sure to mark wires before removal.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Trying to change thermostat [ 6 Answers ]

We have an old GE thermostat, model # 3AHT10B1A2. There are 2 white wires on the left and one red wire on the right. The directions on the new thermostat show 4 different colored wires. We can't tell what's what. Does anyone have a user's manual they can share? We contacted GE and Trane with...

Thermostat change [ 4 Answers ]

Need suggestions for what would be proper stat for 2 heat 1 cool system. Currently using white rodgers thermostat, which lacks backlit feature and has no battery backup for power outages. Is a 24v wired system. 7 day programmable features. Thanks

Change old thermostat to new one [ 1 Answers ]

I have a old White Rodgers thermostat model # 1f56w444. At the connections the wires are. W, Y, G, RH, jumper to RC, and B All the new ones that I have seen have. W, Y, G, RH, jumper to RC, but no B My question is what is the be wire for and what kind of new digital...

Thermostat Change [ 1 Answers ]

Recently I remodeled a house and gutted the interior. My son-in-law asked if I wanted to look at the old Honeywell T87 thermostat before he removed it. I told him to remove it, after all, how hard is it to rewire 4 wires. When it came time to install the new digital Honeywell thermostat,...


View more questions Search