Ask Experts Questions for FREE Help !
Ask
    kathienew's Avatar
    kathienew Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Apr 27, 2008, 11:23 AM
    My thermostat in one room won't turn on the gas furance or start the air conditioner. I have switched the units around to different areas in the house ( I have 4 units) and they all seem to work except none work on this one room.Cleaned the wires and do not see any loose wires. Anyone have an idea ?
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
    		  
    #2

    Apr 28, 2008, 10:11 AM
    Sounds like maybe you have a disconnected or broken tstat wire that's not sending a signal, could be on the other end at your furnace
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Changed over from White Rodgers Thermostat to Honeywell thermostat [ 3 Answers ]

I have a White Rodgers 2 stage heat/1 cool model 1F58-58 heat pump thermostat that I have changed over to a Honeywell programmable thermostat model RTH7400. Did all the correct wiring as stated in the books but when set to cool, the heater kicks on instead of the central air conditioning. What...

Changing over from White Rodgers Thermostat to Honeywell thermostat [ 3 Answers ]

I have a White Rodgers 2 stage heat/1 cool model 1F58-58 heat pump thermostat that I want to change over to a Honeywell programmable thermostat model RTH7400. I need help in trying to figure out the wiring part of this whole thing. Can someone out there please help. I would certainly appreciate...

System does not react to thermostat, thermostat set to off, AC still runs. [ 3 Answers ]

We had a new AC system put in this summer. I turned it off as the weather moderated, but even though the thermostat is set to off, the AC runs. It also looks like the heat does not run. It was chilly last night and I turned the thermostat to heat on and set the temperature appopriately, but no...

Thermostat turns on furnace and then thermostat shuts back to HOLD [ 7 Answers ]

I believe that when we re-run the program with the correct date and time, if the temp has to go up, the furnace runs until it gets the appropriate temp, then it turns off and when it does that, the thermostat also turns off going to the HOLD state.:confused:

View more questions Search