 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Tempstar furnace - soft lockout max ing reached
I have a tempstar smart comfort furnace. It is very cold out- will not keep up with heating the house. Getting a code of soft lockout max. ignition reached. I turned the thermostat down to 2 degrees difference and the furnace will run but not to get to the 2 degrees. It is a propane furnace- 1000 gal tank with 45% new regulator this fall. New thermostat this fall.
|
||||
Check out some similar questions!
We just installed a 70,000 BTU goodman furnace and it worked fine then it gave the code of 4 flashes. We tested eveything and still locked out.
My furnace is a Sears Kenmore 90 (Propane) The info on the placard inside the cabinet is: MFG.: HQCD (I believe it to be a TempStar) Model: NULK125DK03867 Mfr. No.:NULK125DK03 The problem: Thermostat calls for heat The ID fan starts and I've inspected the vent and there is air being blown...
I have a Bryant furnace model 394GAZ036100. The problem I am having is intermitant. Furnace will run fine sometimes 6-8 hr, cycles OK and then doesn't start up on calling for heat. If I shut of power and turn it back on it will start and cycle OK. Never has messed up while I am sitting there...
My gas furnace will light, but then the flame goes away within a few seconds. It does this several times and then the LED light blinks six times which the sticker on the furnace indicates means a system lockout. What can I do to repair this?
Good morning I was placed on probation for 2yrs in the state of NH. The max date has come and gone. Will I be receiving paperwork from the probation officer?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
