Ask Experts Questions for FREE Help !
Ask
    Bluebuzzsaw's Avatar
    Bluebuzzsaw Posts: 2, Reputation: 1
    New Member
     
    #1

    Feb 28, 2009, 04:03 PM
    Taco 0010-F2 pump
    Hi

    I have a Taco 0010-F2 pump on my underfloor heat system. Do these pumps lose pressure over time? If so is it normally the replacement cartridge or the electrical windings that cause the problem. Any easy way to test the windings without taking it in?

    Thanks
    mygirlsdad77's Avatar
    mygirlsdad77 Posts: 5,713, Reputation: 339
    Plumbing Expert
     
    #2

    Feb 28, 2009, 04:34 PM

    Best to just replace complete pump if you are sure pump is not working correctly.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Submersable Pump - 220 volt - Capacitor Overheating - Pump Shutting Off [ 16 Answers ]

My 220 volt submersable well pump stopped working. We took the capacitor in to be checked one day and it was fine. The next day we took the relay in and it checked out. The following day I pressed on one of the wires that goes to capacitor and the well came on. The wire was old so I knew it...

Is it my TACO circulator or my heating coil? [ 1 Answers ]

I have a High Velocity forced hair heating system that exchanges the air with hot water from my hot water heater. The hot water is pumped through a coil in the HVAC unit by a TACO 006 B4 cartridge circulator and loops back down a return to the hot water heater. There is still air coming out of...

Pool pump and booster pump timer diagrams [ 2 Answers ]

I am looking for a diagram that shows how to hookup two intermatic timers to the pool pump and the booster pump. Running 220volts

Wiring old taco zone valves 555-102 to furnace [ 1 Answers ]

Help! I have a two zone system of water base boards hooked up to an oil furnace (or is it a boiler?). I had it serviced a month ago and I just realized that the wiring on the two zones, which are controlled by taco 555-102 zone valves, was reversed so that the wrong thermostat controlled the wrong...

My Chuhuahua Taco is SKINNY! [ 3 Answers ]

:confused: Ok he was about the size of a soda at the age of 10 weeks and chubby and after I got him he stopped eating. I had a bowl of dry food and a bowl of wet food and water and occasional chicken or whatever meat I had and he got so skinny to the point his legs and arms were bones and his...


View more questions Search