Ask Experts Questions for FREE Help !
Ask
    cuttingedge's Avatar
    cuttingedge Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 25, 2013, 09:20 PM
    Status code of five flashes
    I have checked the ground from disconnect box to the unit and also checked ground from control board to ensure they were grounded properly. Each time when I restore power, I still get five flashes. Is the control board bad?

Check out some similar questions!

Furnace not running,code flashes 3short flashes by 1 long flash on a bryant 90 t [ 2 Answers ]

Code flahes 3 short flashes by 1 long flash

Have a york affinity 8.t furnace flashes 4 code [ 1 Answers ]

Need to find out what is code for #4

My furnace fault code light flashes three times the pause and flashes three times aga [ 3 Answers ]

My furnace fault code light flashes three times the pause and flashes three times again and repeats. What is wrong?

Furnace code flashes 2 times [ 1 Answers ]

My Trane XR80 furnace is showing a flashing code of 2. The manual indicates it as external lockout. Any ideas as to what this means and how to repair it?

Luxaire status light flashes 8 times [ 2 Answers ]

We have a Luxaire heating and cooling system that has been a nightmare from day one. Our model # is G2FD060H24A. Recently, we lost power (due to a storm) while the a/c was on and when the power came back on the unit runs outside but the blower does not come on. We pulled the front off and the...

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.