St9141a1002 burner limit circuit open?

AZURRE Posts: 1, Reputation: 1

New Member

Mar 23, 2011, 11:00 PM

St9141a1002 burner limit circuit open?

Honeywell Sv9501m2528 Pilot Ignition system,
Honeywell Circuit Board Part #ST9141A1002
LIGHT ON CIRCUIT BOARDS LIGHTS ONCE - BURNER LIMIT CIRCUIT OPEN,
Replaced gas valve and pilot sensor, THESE IS NO GLOW AND NO HEAT, FAN TURNS ON.
WHAT MAY BE WRONG ? WHAT SHOULD BE CHECKED ?

Check out some similar questions!

Residential Furnace "Burner Limit Circuit Open" [ 1 Answers ]

Hello, I am currently residing in a rental home and woke up to a VERY cold home in the dead of the winter in Northern Michigan. Upon inspecting the unit I have concluded that the board is flashing at me once (solid-flash-solid-flash-solid etc.) which corresponds to "Burner Limit Circuit Open" I...

Limit circuit open [ 2 Answers ]

I have a nordyn furnace. I replace the inducer motor cause it was making a noise and would not run all the time. I also replace a limit switch that is built onto the inducer motor. This limit switch keeps triping and it throws a code of "limit circuit open or external load on "w"." I can...

Nordyne Furnace "burner limit circuit open", during A/C operation [ 4 Answers ]

Hi all, Hope this makes sense and required info is present. Any help or suggestions is appreciated, thanks. Furnace brand is Nordyne, about 3 years old, cooling portion model# of unit is JS3BA-036KA. This issue started last week. The A/C still works, but now the blower portion? Doesn't shut...

Furnace "burner limit circuit open", How to fix? [ 2 Answers ]

The furnace in my vacant rental property does not light. The blower runs but the igniter never glows and the gas valve does not open. The LED blinks once which means the burner limit circuit is open. How do I replace the burner limit circuit? Inside the furnace cover I found the electronic...

View more questions Search

Check out some similar questions!

Add your answer here.