Check out some similar questions!
I have an armstrong sx ultra 80 gas furnace the pilot is lit but the burners will no
 [ 4 Answers ]
 I have an armstrong sx ultra 80 gas furnace the pilot is lit but the burners will only come on when I take the door off till they light and then I put the door back on once the temp reaches the level on the thermostat it will shut off it will not come back on when the temp drops until I go and do... 
Old Armstrong Furnace.  Pilot lit, burners won't
 [ 4 Answers ]
 Yesterday AM the breaker for the furnace kept tripping. I opened it up and noticed that the wire running to the limit screw on the limit switch had melted to the furnace. I removed the wire and ran a new one. Now the fan runs but the burners won't. Any ideas? 
Furnace burners will not turn on, but the pilot is lit.
 [ 6 Answers ]
 I turned on the heat for the first time this season and no heat came out. I checked the furnace and the pilot was out. I lit the pilot and it stays lit (been on for over a day now.) I tried the heat again and still nothing. So, the furnace is getting power, the fan works when "ON." The pilot... 
Gravity furnace pilot is lit but burners aren't working
 [ 14 Answers ]
 
  
  I have two large gravity heaters - the kind with asbestos octopus ducts - in my basement. They were made by Pacific Gas Radiator Company (Huntington Park, CA). The pilot lights but the burners do not fire. I try to clean them out each year, but I have the problem repeatedly. On the other unit, the... View more questions Search 
 Add your answer here.
  |