 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Intertherm furnace troubleshooting
My furnace MMBA 090ABAR-01 with Ham Std 1018 series hot surface ignition continually goes through recycle of about two minets of running and 40 seconds of shut down. The actual burning seems to shut down after the blower comes on and then restarts and burns for something less than a minet. There is no blinking trouble light. Mild heating requirements are not a problem but cold weather is a big problem.
|
||||
Check out some similar questions!
I have an Intertherm furnace model mmha056aahr05. Glow plug lights burner starts then shuts down. 3 blinking lights on the code says gas valve error or false flame sensed. Any ideas on problem solving or where can I get a manual Thank You
My intertherm oil furnace is putting out an oil smell at different times. Not consistent. Seems to be before it switches on. Had a maintenance guy come and service it and he changed the nozzle, oil filter, and air filters and couldn't see anything wrong. Said it was burning good. Of course it...
I have an intertherm gas furnace.. For some reason the heat portion won't kick on when turned on all gas connections and switches are on that need to be... When I bought the mobile home the original owners said that the heater worked... Any ideas why the pilot light won't kick on its fairly brand...
My intertherm #e2eb-01sha electric furnace mostly just blows cold air. Sometimes however the heat works just fine. Also, anytime the blower is not running the furnace is hot so we have to turn off the safety disconnect. We have tried replacing the thermostat to no avail. Help please Michael
Furnace will heat up without fan starting. I have to turn fan on at thermostat. Its an electric furnace.
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
