Not your question?
  Ask your question
  View similar questions
   
  
 Add your answer here.Check out some similar questions!
Can I replace galvanized pipe in attic with PVC
 [ 9 Answers ]
 I have a leak at an galvanized elbow, luckily, there is a union righ above it. Do I have to use galvanized or can I use threaded PVC? 
Today's project - fix pull down attic stairs
 [ 9 Answers ]
 Yuk! Lid had to be removed. It was a real pain to put back on. Had a split on the stair runner under the top set around the hinge. Glued and put 4 screws in it. One step had to be screwed in place with 4 screws. Tightened all nuts. Got rid of some stove nuts and replaced with fender... 
Install Bathroom Exhaust Fan, No Attic
 [ 1 Answers ]
 I am needing suggestions. I have a downstairs bathroom that need an exhaust fan put in. There is a light in the ceiling, however there is no way to get an exhaust duct in without ripping out the ceiling. I am needing this for moisture removal due to shower starting to mildew the ceiling. The... 
Replace Lead Pipe from Toilet to Hubless Waste Pipe
 [ 3 Answers ]
 My house is a craftsman style house from 1912 in Oakland, California. I have a big hole in a 24" horizontal lead pipe that bends at 90 degrees and connects the only toilet in the house to the hubless waste pipe. How do I go about removing the lead pipe? (What tools do I need and what type of... 
Attic venting of bathroom exhaust fan
 [ 4 Answers ]
 
Our bathroom has a ceiling light fixture whice I would like to replace with an exhaust fan. I understand the need to vent this out of the attic and to have the duct well insulated to avoid condensation. The problem is access to the outside. We have a roof with four sloping sides, no vertical ends.... View more questions Search 
  |