 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
I have a 80MGF3 the circuit board was change out during the summer with a 19w94 ign conversion kit. The air worked find for the summer,but when the thermostat was place for heat the ignitor would not produce a spark. The inducer fan comes on, the gas valvue opens, the ignitor tries to ignite, but...
Hello, I have an 80MGF3-75-3 the circuit board was shorted out. Replaced the circuit board, and the electrod ignitor. When the call is for heat, the blower motor comes on, and there is a strike for spark, but no spark can be seen, and the hearter refuse to light. After four tries the shutdown...
Hi, I have a lennox model 80MGF3/4-100A1 Furnace.. My problem is that when the unit is calling for heat the induce fan comes on and then I hear the board click that allows the blower motor fan to come on.. I never hear any sparking at the ignitor, I've cleaned the rods and bent them a little closer...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
