 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Solid fuel stove - what materials/equipment required.
I have oil fired central heating & electric emersion and want to install wood burning stove to heat water and radiators along side the oil. Been advised that, apart from the stove (Stanley Erin with boiler) I need to change existing water cylinder (single coil) to a twin - oil & solid fuel or Triple to include solar, In case we do that in future and circulation pump and shower pump (water pressure not great). What else do I need?
|
||||
Check out some similar questions!
Greetings, I have an England Stove Works 25-PDVC/55-SHP10 pellet stove. We've had it for almost four years with no problems. I clean it out and grease the augers every fall before running it for the winter season. It has recently started having a problem with the blower speed. We start it...
GAS STOVE WITH ELECTRIC PILOT TRIPS BREAKER .THE REPAIRMAN SAID IT WAS 'ENERGIZED'? Landlord is replacing stove with gas pilot .will it still be energized/IS THAT DANGEROUS?
I have a multi fuel heating system, the system does not get all the rads hot, the farther away the rad from the appliance the cooler they are even with a roaring fire. I have turned the electric off to the controls, and really got the water so hot it came out of the overflow pipe, restoring the...
Hi, I have a Coalbrookdale Severn Multi-fuel stove that heats the radiators and water of my home. The thermostat knob on the side of the burner is very loose to turn from 1-5 (unusual) and then shows some resistance (usual) from 5-8. The fire also seems unpredictable and controllable. Any ideas?...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
