Ask Experts Questions for FREE Help !
Ask
    royaman's Avatar
    royaman Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 2, 2010, 09:18 AM
    Bryant plus 90
    Fan blower works but no heat. Is it the ignitor or flame sensor?

Check out some similar questions!

Plus 90 bryant [ 2 Answers ]

I think my blower motor is going and I can't find any numbers or info on it to get another. Anyone have any ideas?

Bryant plus 90 [ 0 Answers ]

Code 31 . The ignitor is taken out for replacement. The inducer moder does not start in the beginning. It starts after the 90 second blower motor runtime. What might have gone bad?

Bryant [ 1 Answers ]

I have a bryant plus 80 series g furnace. Model 395CAV048111. My furnace will start a cycle but goes off. Then the led will flash 5 times, pause and then repeat the 5 flashes. Also, if I unplug the furnace it will reset and complete a cycyle, then it will start going off again. Any help would...

Bryant 310aav0360 [ 2 Answers ]

I think my communication bord is out in my furnace.(Bryant 310AAV0360) How much do they run? My heat would come on for no more than a minute and then it would shut off.

Carrier vs Bryant [ 2 Answers ]

I have two quotes from two reputable installers. One quotes Bryant and the other Carrier. Both units are the second from the top level of the lines for scroll compressors and Puron. (Bryand Model 165a 5 ton versus Carrier Performance Series 5 Ton) The Bryant is being quoted a bit cheaper than the...

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.