Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Blower motor cuts out
[ 2 Answers ]
The blower motor on my furnace cuts out when I turn on the AC. I have the unit set to run the fan continuously and when turning on the AC the fan quits. The motor is a direct drive to the squirrel cage. I cleaned the cage and motor and reinstalled. The motor runs but does not seem to be moving...
Heater blower motor
[ 4 Answers ]
Blower kicks on for a short time and then kicks off. It cycles repeatly, is it possibly hysterisis of the thermostat setting or furnace related? The model of our unit is: Intertherm Model 911030. It operates normally when there is a large differential between the temperature and thermostat...
Blower motor
[ 1 Answers ]
THere is no air blowing when the heat is on. The furnace does come on but no air blows. If I turn the heat off and manually turn the fan on the air blows. If I leave the fan switch in the on position and turn the heat on the air stops.
Blower Motor
[ 1 Answers ]
I have read multiple posts about wiring for blower motors and saw one that almost answered my question. I have an old blower motor that I would like to convert to a shop air filter. I know that it is a multi-speed motor. It has 8 wire connections and are labeled as such: Power cap cap ... View more questions Search
|