Check out some similar questions!
Trane xe80 4 flash error code
[ 1 Answers ]
My 8 year old Trane XE80 heat comes on then when it cycles off the fan keeps running and I get 4 flash error code. Help please. Thanks
Trane XE80 furnace occasionally produces no heat, error code 4
[ 3 Answers ]
Hello, I have a Trane XE80, model number TDD080C936E0. A few weeks ago, it started blowing only cold air with error code 4 - high temperature limit open. If I shut it down, and start it up again in about an hour or so, sometimes it comes back on, sometimes it doesn't (produce cold air only). ...
Trane xe80 code 4, no heat
[ 5 Answers ]
All summer the cooling worked fine, when I switch over to heat this week, it didn't come on. The control box shows a code 4, which says "THERMAL PROTECTION DEVICE OPEN" Any help?
Trane XE80 blows cold error code 22
[ 5 Answers ]
From my earlier post ignite for a few seconds the stops, now, heat commanded, blower motor runs, no ignition, and flashes code 22 Help!
Trane XE80
[ 1 Answers ]
My 10 year old Trane XE80 in my woodworking shop lately cannot put out enough heat to satisfy the thermostat, which yesterday was set at 72 degrees on a 37 degree day. The steel building is completely insulated, and this has never happened before at this outside temperature. The furnace seems to... View more questions Search
Add your answer here.
|