Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Carrier 58SSC only igniter comes on, no burners.
[ 0 Answers ]
This is an older furnace but it has always worked fine until this year. I have had it inspected a couple of years ago also along with my upstairs neighbor who had problems and decided to replace her furnace, which was also a Carrier of the same year. I looked at some of the posts and tried cleaning...
Carrier Weathermaker 8000 igniter never glows
[ 1 Answers ]
I have a Carrier weathermaker 8000 Product # 58ZAV050--16112 Series 160, Model 58ZaV050-12, Series 0802A72264. The unit is not working, i.e. getting hot air and I get error code 34 then after 3 tries(as it should according to manual) I get error code 14. I powered off the unit to begin...
Igniter will not glow in my gas dryer
[ 1 Answers ]
I have a whirpool duet gas dryer that will not dry my cloth,the drum spins .I removed the bottom panel and put the power on did not see any glow or any thing else turn on .Can some one pin point the problem?
Igniter will not light furnace
[ 3 Answers ]
Carrier gas furnace will try to start, but igniter does not light furnace. Red light in window flashes -is thiis the "code" for the numeric list on the attached plate?
Carrier hsp gas valve/igniter control
[ 2 Answers ]
Please help!! I have a carrier gas pack with a hsp valve/ignitor and after going through the ignition procedure I get nothing. I have replaced the inducer board and the inducer fan does work, however that is the only thing that appears to work. BEFORE spending another 150 bucks on the hsp... View more questions Search
|