 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Mears Thermostat
I have a Mears M611WT single line thermostat with thermometer. The old thermostat had a black and white wire and a copper neutral coming from the electrical box in the wall which was connected to a single pole 120/240 20 amp thermostat. The new Mears thermostat has a black and red wire and a thinner white wire. To what do I hook these three wires to the wires in the electrical box.
|
||||
Check out some similar questions!
I just replaced a MEARS thermostat for my electric baseboard heat that would only operate in the full on or full off position. In other words "all or nothing". I put in a new MEARS M 612 and wired it the same way the old thermostat was wired. This also agreed with the schematic that came with...
I have mears 240 volt double pole thermostats in my house for my celling heat.They have been in for 23 years. They work great.except they have become very hard to turn the dial.Any [email protected]
I have a late 60's home with electric coil heating in my ceilings. Each room has their own thermostat, my master b. room came on unexpectingly last week. What kind of thermostat will I need to get? It is heat only. I will tell you I am ignorant to any kind of electric problems. I just don't know...
We have mears thermostats controlling ceiling heat - of the 11 in the house some work marginally- the mears number on the thermostats is M22-DP - 22amp/double pole - Is there a programmable replacement for the mears antiques? If so a purchase site? Thanks
I have a Mears M600S Line Voltage Electric Heat thermostat. It has two individual circuits in it. One circuit for each side of the room. I'm having a great deal of difficulty finding a replacement. Does anyone know where I might find one or an equivalent that has two separate circuits each...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
