Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Furnace fan/blower does not turn on automatically
[ 6 Answers ]
I have a furnace, which worked well until today. The furnace fan/blower can be turn on manually (switching to ON position from the thermostat--Maple Chase 9600). However, when the fan switch is switched to AUTO position, and the room temperature is below the setting temperature, the furnace is...
Trane Heat Pump will not turn on
[ 2 Answers ]
I have a Trane heat pump with the air handler in the attic. We attempted to change the thermostat from a GE to a Honeywell. I have received confirmation from a specialist that we have wired everything properly. We cannot, however, get the heat pump to engage (or do anything, for that matter). We...
Furnace Does Not Turn on Automatically
[ 33 Answers ]
Sometimes when I have the furnace set on automatic it will not turn on when the temperature goes below the set point. All I have to do in order for it to work again is turn the furnace off then back on (I do this at the thermostat) and it will work fine for a day or two, then the same thing happens...
Carrier Weathermaker SX, does not turn on automatically, shuts off
[ 19 Answers ]
Hello, We have a Weathermaker SX. Yesterday morning I woke up and it was only 61 degrees. When I shut the heater off and turn it back on, it heats for about 5 minutes and then stops. The same works on the thermostat, when I turn the heat off and on again. Sometimes it comes on one more time...
Changed Thermostat will not automatically turn Furnace on
[ 1 Answers ]
We changed our old honeywell thermostat (with mercury) to an updated honeywell thermostat (with no mercury) CT87K. After we changed the thermostat the furnace will not automatically kick on and it actually shut off so we had to hit the reset button. The furnace at times now will turn of if we put... View more questions Search
|