 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Zone systems have the advantage of being able to set the temperatures different in different sections of the home. I have 3 zones here and that allows me to save energy by not keeping the heat up all the time when the areas is not in use. Basically it offers you more control over your system.
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
We have been having problems with our dual zone system, operated by two LUX 1500 thermostats. When both systems are on, the temperature in one of the zones (typically upstairs when heat is running, downstairs when airconditioning is running) will exceed the limit for that zone, but the system will...
We are developing plans for a 2500 sq ft bungalow with two distinct zones of 1000 and 1500 sq ft. We would like to control heat and a/c in each zone. We will be using a high efficiency oil furnace for heat installed in the basement. Dual zone systems are not yet common in our area (Eastern...
Dual Zone Control for Whole House A/C I have a 5 TON Unit (Carrier) and a WHITE RODGERS 1F90-371 Programmable Thermostat in a 5/4 Private Dwelling. I've started using a closet for all my I.T. Gear, Servers, Raids, WiFi Routers etc... as you might guess; the I.T. Closet's become a hot-box. I'm...
My two-story home in Virginia has one thermostat controlling natural gas heat on the main level and a second thermostat controlling a heat pump upstairs. I have been warned against installing a programmable thermostat upstairs (may actually increase the heating costs for a heat pump), but am I o.k....
I have forced hot air dual zone heating at my home. When I set the temperature at 70 in the first floor.. The fan is also blowing in my 2nd floor and the temperature increases in the 2nd floor to 70. Where as the thermostat in the second floor is set to 62. I looked at the furnace and saw a...
View more questions Search
|
