Ask Experts Questions for FREE Help !
Ask
    captmo's Avatar
    captmo Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Oct 17, 2007, 06:58 AM
    Noma programmable thermostat
    Need to relocate a Noma programmable thermostat, it has 2 parts, the thermostat & base, how do you separate the 2?
    labman's Avatar
    labman Posts: 10,580, Reputation: 551
    Uber Member
    		  
    #2

    Oct 17, 2007, 10:09 PM
    Some brands the front just pulls off. I have asked for this to be moved to Heating and Cooling. Somebody there should be familiar with the Noma. You could also try to dig up a manual on line.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Noma Programmable thermostat [ 14 Answers ]

I have tried to replace a conventional lever action mercury thermostat with a new digital programmable Noma thermostat. The AC works fine but when I turn on the heat, the AC come on then too and not the heat. I have no heat. This was the wiring for the original thermostat: Orange -> Y Red ->...

Noma programmable thermostat [ 2 Answers ]

I have tried to replace a conventional lever action mercury thermostat with a new digital programmable Noma thermostat. The problem is when it turns on the heat and fan works fine but when it reaches heating it shuts of but the fan stays on and will not shut off:confused:

Noma Programmable 5+1+1 thermostat [ 2 Answers ]

Hi everyone, I just purchased the above mentioned thermostat and connected the wires accordingly. My question is the old mercury thermostat had a jumper to R and RN if I'm not mistaken. The new digital thermostat only asks that the four wires be connected with no mention of a jumper. I...

Noma programmable thermostat [ 2 Answers ]

We have programmed the thermostat and it always jumps back to another setting. Can you help.

Programmable noma thermostat [ 1 Answers ]

I am changing a York thermostat to a Noma programmable. I have rewired transferring w to w, rc to rc, g to g, y to y . There is a wire jumper on the York that goes from rc to 4. There is no corresponding 4 on the Noma. Does anyone have a suggestion as to where the wire jumper should go if I...

View more questions Search