Search:
Type: Posts; User: wuswus
Search:
Search took 0.00 seconds.
-
I've attached a picture of the resistor.
Thanks.
-
I have a Carrier Furnace which has a bad circuit board. I noticed that the resistors on the printed Circuit board look burned. The circuit board is a CES0110057-00 and the resistors reside on R57...
-
I don't want to damage the circuit board. Can switching L1 and L2 OR PR1 and PR2 cause any damage to the board?
-
The red/white wire pair run to the Air Compressor and Red on Y and Whit on Com. When I switched the other was the 3AM fuse would blow. So, now thos wire are switched back to Red on Y and White on...
-
I see from the Transformer a thin White Wire going to PR2 and thin Black Wire going to PR1. I also see from another part of the furnace a thicker White wire going to L2 and a thicker Black wire...
-
I just installed a new Circuit board in my Carrier Furnace. When I tested having only the White wire to CON and the Red wire to Y. The RED light Flashes Sold RED for 5 sec. and then flashes. The...
-
I just installed a new circuit board in my Carrier furance. When I do the Self Test I get a rapid flashing light which indicates a line voltage polarity reversed issue. How do I correct? Which...
-
I need to order a new circuit board for a Carrier 8000 WeatherMaker furnace. Can anyone recommend where, either Internet or locally in Northern Virginia, to order the board. Thanks.
-
Do you know of any test that I can perform on the Motor Run Capacitor? Some of the research that I've done points to the circuit board. Is there a way to jumper around the circuit board to force...
-
The blower does not work regadless if the thermastate is set to Heat, Cool, and the fan is set to Auto or RUN. I do hear a click when FAN is set to RUN.
-
I have a Carrier Weathermaker 8000 furnace and recently the blower does not run. I noticed that when I set the Thermostat from AUTO to Run the Fan does not come on a faint click can be heard.
...
|