Ask Experts Questions for FREE Help !
Ask
    yz125dad's Avatar
    yz125dad Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Mar 20, 2011, 10:30 AM
    RPJ II open rollout switch
    The furnace has been idle for a year. Energize the system, single blink. (lockout, to many tries), but happens on initial attempt. Push/release switch behind cover several times and hold in, furnace starts exhaust fan and main blower fan come on, exhaust stops after 10 seconds, main fan continues to blow. When fans come on 5 blinks, open rollout switch code. The unit never got gas, no igniter no glow.
    mygirlsdad77's Avatar
    mygirlsdad77 Posts: 5,713, Reputation: 339
    Plumbing Expert
    		  
    #2

    Mar 20, 2011, 11:00 AM

    The rollout switch is usually located near the burners. It's a small switch with two wires going to it, and there is a small button between the wires that you can push to reset. Try that and let me know if it works.
    yz125dad's Avatar
    yz125dad Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Mar 20, 2011, 11:27 AM
    Comment on mygirlsdad77's post
    Thanks for the quick response. It's a summer house upstate New York. I'll give your suggestion a try and give you a heads up when I go there again. Thanks again!!
    mygirlsdad77's Avatar
    mygirlsdad77 Posts: 5,713, Reputation: 339
    Plumbing Expert
    		  
    #4

    Mar 20, 2011, 11:31 AM

    Look forward to hearing from you.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Limit or rollout switch open concord furnace [ 1 Answers ]

I have a Concord 80 plus furnace. The code I'm getting is Limit or rollout switch open. The burner goes out after a few minutes and the blower motor keeps running. If I wait it resets itself after 15 minutes it will do it 3 times then it won't reset for an hour. I found two limits on each side of...

Open rollout error code in 2 yr old Goodman furnace,but rollout tests good [ 5 Answers ]

Vgftft

Limit or rollout open [ 3 Answers ]

I have a ducane furnace model MPG075B3A. The gas valve is flashing 4 flashes the code is limit or rollout open. I cannot find my owners manual to find the location of these switches. Any help would be appreciated.

Comfortmaker open rollout switch error [ 1 Answers ]

I have a comformaker furnace and the heat will run for roughly 5 minutes and then shuts off with blower still running. I noticed the duct going up from the main unit is extremely hot (not sure if this is normal), but the light unit blinks 5 times which says "open rollout swith error"? What does...

Brayant 80t furnace, 'Limit or flame rollout switch is open"? [ 1 Answers ]

HI, I am new here and am having a furnace problem. As a new homeowner I would like to take a look at this myself before just grabbing the phone books. I have a Bryant 80t furnace. Built in 2000 and has been serviced every other year. Unit is clean and in good shape. Woke up to a cold house and...

View more questions Search