Ask Experts Questions for FREE Help !
Ask
    jlstewross07's Avatar
    jlstewross07 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 16, 2009, 10:53 PM
    Rheem furnace thermostat w
    For the last couple of days we have had to manually flip the thermostat to click on. We usually have it set to 70 degress but the temp will not go above 68 before it shut off again; What could this be and can if be fixed inexpensively Jackie
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Jan 17, 2009, 02:40 AM
    Quote Originally Posted by jlstewross07 View Post
    For the last couple of days we have had to manually flip the thermostat to click on. We usually have it set to 70 degress but the temp will not go above 68 before it shut off again; What could this be and can if be fixed inexpensively Jackie

    Explain in better detail. The statement is confusing. No matter what you do the temperature will not go above 68 degrees with out the furnace shutting off?? Is this what you are trying to say??
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Rheem to Hunter 44860 Thermostat [ 7 Answers ]

Trying to replace an old thermostat with a Hunter 44860 and can't seem to get it to work. The wiring on the old Rheem unit is as follows - B - Blue Wire R - Red Wire G - Green Wire Y - Yellow Wire W2 - White Wire X - Brown Now the new unit has the following... note that it does not have...

Rheem heater thermostat wiring? [ 1 Answers ]

Hi, I'm trying to figure out the following: The Rheem-Vulcan electrical water heater had a faulty thermostat (part number:051308, 50-70 degrees). I bought the replacement (direct match not available), part number:1317216, 60-75 degrees. The problem is in the fact that the original thermostat's...

Rheem to Hunter Thermostat [ 1 Answers ]

Currently, I'm trying to replace an old rheem thermostat with a hunter Model 44155C. The wiring colors are confusing to a novice like me. There are five wires: red, green, blue, yellow and white. The hunter thermostat has connections for RH, RC, G, Y/O, W/B, and Y1. The only two wires that I...

Honeywell thermostat heat/cool in Rheem 2 stage furnace? [ 1 Answers ]

I have a Honeywell 1 Heat/1Cool thermostat (TH6110D1013) that I would like to use with a Rheem 2 stage gas heat furnace. I think it is possible but would I get the same benefits as having a thermostat with 2 heat/1 cool? Would I just connect the W terminal on the Thermostat to the W2 on the...

View more questions Search