 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
My rheem furnace heats for a little while then goes out and
I have a rheem combo a/c and gas furnace with electronic ignitor. When it calls for heat sometimes it will heat then sometimes it will not.When it goes out I have to turn the thermostat off and the back on. I have a fifty-fifty chance of it relighting though it usually doean't run its full cycle before going back out.It might run for 2 minutes or not at all.or all day.If I leave it off for a while it seems to run a little longer. Sometimes.I have had the inducer motor replaced, heat exchanger,flame sensor. And gas valve replaced.The repairman said the control board is good. And everything seemed to be fine. Any help would be appreciated.I have not replaced the ignitor
|
||||
Check out some similar questions!
I have a Goodman Model# GMP075-3 Serial #9501043865 My furnace heat up for about 15 minutes and then goes out. The HVAC Tech replaced the flame sensor and the auxiliary limit switch and that did not resolve the issue, The Tech says that he checked everything he could think of and the heat exchange...
Hi, I have intertherm furnace and the heating element goes on and off every 30 seconds without the blower coming on.
Everything may be fine with my system, but it seems that it is taking a very long time for the home to heat up, which results in the furnace running all the time. The natural gas furnace is struggling to even get to the 68 degrees the thermostat is set to, and the temperature is only in the 30s...
My electric furnace is not blowing out hot air the furnace comes on heats up but not hot air blows out the fan works and blows out air and the ac unit works too:(
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
