 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Reznor hanging gas heater cycling on and off. Help!
One of my Reznor XL200 hanging heater is creating a smell like burnt gas that some people are complaining about. Once and a while I got a small wiff. One heater is cycling on and off about every minute. The fan doesn't have time to shut off. To start the thermostat is put into call the gas valve opens and the burner lights then the fan kicks on after about a minute. Come back to check it later it is still in call but the burner is not lit. I go up to check it and I hear a click and then the burner lights I go back down and look for a flame but don't see one. I go back up and hear a click again and the burner lights. I stay up there this time and the flame goes out again. I start the timer on my watch and in one minute it clicks and lights again. It stays lit for 1 minute 15 seconds and goes out.In one minute it clicks and lights again. All the time this is happening the fan is running. I think this relates to why somet6imes there is a whiff of burnt gas smell.If anyone has suggestions or opinions about this I would like to hear them. Thank you.
|
||||
Check out some similar questions!
I have a cal spa eliminator series spa and my pump is not functioning.I have one ordered but I noticed my heater light does not come on anymore so just curious if a non working spa pump will not allow the heater to function I guess since water would be not cycling through pipes?Of so, how does it...
I have a reznor f100 natural gas heater. When you turn the thermostat up, you hear a click in the unit and the heater turns on. When you try and shut off the unit by turning down the thermostat, you do not hear that click again and the unit stays on no matter what the room temperature is. I already...
I have a Rhem Hot water heater which nis cycling on and off when it is trying to heat up. Eventually it gets up to temperature but it takes a while as it cyckes on and off. Controler, Thermostat?
Janitrol/Goodman Heater - Filter got wet and was replaced. The heater is cycling on and off, all the way up until the blower should go on and then it cycles down and after a couple of minutes it begins to recycle. I'm thinking it has something to do with the computer thinking there is a...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
