Reversing valve on 5 ton Rheem stuck in middle in heat mode. No heat. If I turn unit on and off a few times valve works - good heat ?

Hi everyone, I appreciate any help you could provide, I'm going to give as much back story as possible to try and make my situation clear. I own a home in north Florida and have been running the heat for a few months now on and off. On Saturday morning I woke up to find that the thermostat...

Hi everyone, I appreciate any help you could provide, I'm going to give as much back story as possible to try and make my situation clear. I own a home in north Florida and have been running the heat for a few months now on and off. On Saturday morning I woke up to find that the thermostat...

I have a Goodman package heat pump model PHJ030-1A. I found a leak in the condenser coil, in the "U" shape joint. I made some checks, reversing valve coil: the resistance was 17. Something ohms, found 24 volts going to the coil, but didn't check for amps. O.K. Would low freon stop the reversing...

Trying to start up a water to air heat pump. The high side r-22 kicks out at 400psi within 3 seconds whether in cooling mode or heating mode. The reversing valve (alco 401RD-10F57) clicks but seems to be the only obstruction that would prevent refrig. Flow. There seems to be no suction side change....