Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Should the flex hose on an intertherm electric furnace be connected
[ 0 Answers ]
Should the flex duct hose be connected on my intertherm electric furnace?
HVAC Furnace will not light when exhaust pipe is connected...
[ 0 Answers ]
At first our furnace heat wasn't coming on, we called our home warranty company and they sent out a HVAC guy. He replaced the inducer motor and the pressure switch. Then it still wasn't coming on properly so he said it was the exhaust or flu pipe that was blocked and we had to call a plumber to...
Dayton Furnace turning on without Thermostat connected
[ 1 Answers ]
Hello, The title is a bit misleading... Some background. My Dayton furnace (less than 3 years old) had been working fine this winter. Yesterday, I caved and turned on the A/C, which was also working fine last summer. I noticed that the condenser was not kicking on. I checked the furnace...
2 thermostats connected to one furnace
[ 0 Answers ]
I have a furnace that I would like to connect two thermostats to. I'd like to be able to control system when I'm in the basement or when I'm on the main floor.
Furnace-Yellow terminal not connected-A/C starts stops
[ 3 Answers ]
I have a 1988 Rheem RGDA-125-ER furnace. I noticed over the summer that the A/C, when switched to cool, would come on and then immediately switch off if the set temp was higher than the room temp. If I programmed the set temp far below room temp and then switched on, it would run normally and I... View more questions Search
|