Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Replacing a mercury thermostat for a Hunter Model 44110
[ 3 Answers ]
I have just purchased a Hunter Programmable Thermostat Model 44110. I have taken out the front panel off my old thermostat and notices that my wires are red, white, yellow and green. The panel for the Hunter 44110 has the connections for G, Y, W and the RC and RH have a jumper. What do I do with...
Replacing a Janitrol thermostat with a new programmable Hunter model 44360 for single
[ 3 Answers ]
-------------------------------------------------------------------------------- I would like to know about replacing a Janitrol thermostat with a new programmable Hunter model 44360 for single stage heat pump with emergency electric backup. The terminal labels on the janitrol are : Y, G, R,...
Connecting Hunter Model 44110 Digital Thermostat
[ 4 Answers ]
I have a 15 year old house, with an original heating/AC system. I hoped to connect a new Hunter 5+2 model 44110 digital thermostat, but have run across one problem. The old Trane Thermostat has this information on it - Model AY28X105 30Volts A.C. 1.5 AMP with 5 wires, labelled G, Y, W, R, 2...
Replacing old thermostat with a Hunter 44110. Wiring issues.
[ 4 Answers ]
We had an older CArrier thermostat. The old wiring went as follows... Orange = o/w2 Red = R y/y2 Yellow G = Green C = Black (Common) W/W1 = White New thermostat has the following
Replacing an old Honeywell Thermostat with a Hunter Model 44260 to a York Heat Pump
[ 0 Answers ]
I have an older Honeywell thermostat with wiring G(green) W(white) R(red) X(blue) B(black) O(orange) & Y(yellow). My new programmable thermostat Hunter 44260 has G R/C R/H Y/O W/B & Y1. Which wires go where on the new 44260 thermostat? The manual is not easy to understand. Thanks! D View more questions Search
|