 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
How hard is it to replace control board in carrier 58wav upflow? An where to find one?
I have a gmp 075-3 I havea control board icm 280 and b1809913.The 280 everything comes on except the blower motor.the b1809913 everything comes on except the flame and the led blinks 4 times with the other board icm 280 solid led no blower motor go figure that out and there both new.anybody got...
I'm working on a forced hot air furnace that's in a basement that got flooded and the furnace was only on 2-4 so it looks like the whole blower motor and control board transformer got flooded. I responded to a no heat call today check the unit the unit won't do nothing, it has power coming from...
My control board seems to not be working the light won't come on it is a goodman 90% furnace I do not have the home owners book for it
I am new at this! My third American Standard gas furnace fan control in seven years needs replaced. To save a few hundred dollars I would like to do it myself. I am replacing CNT 03076 with its replacement CNT 03798. Has anyone done this and are they configured the same? Can wire for wire be...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
