Ask Experts Questions for FREE Help !
Ask
    lauragrisham's Avatar
    lauragrisham Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Feb 17, 2009, 02:23 PM
    Replace Rheem Criterion inducer motor
    Can someone tell me what part number and where I can get a replacement inducer motor on a Rheem Criterion, circa 1992, model RGDG-150ARJR? Already had someone come out and said ball bearings were going bad and motor should be replaced. They wanted to charge me $400 for the motor alone. I see motors on the internet for about $150-$250. I just don't know which one to order. Grainger is in my area and they don't sell Rheem furnace parts.
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
    		  
    #2

    Feb 17, 2009, 06:15 PM
    Take the motor out,, take it to Grainger,they should be able to match it with something,that will work. Just make sure its very close to the same rpm`s ,same voltage,and runs in the same direction,, get a new capiciter for the new motor

    And ofcoarse will mount correctly
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
    		  
    #3

    Feb 17, 2009, 07:19 PM
    Woops,, didn`t notice that you was looking for a inducer motor,, so strike the part about the capiciter,, but I`ve been very lucky on grainger finding motors
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Criterion II Rheem LED signal [ 3 Answers ]

I do not have an operations manual nor can I find one online that will tell me what it means when my Criterion II heater has a LED light that flashes 4 times and will not kick on. I can get the heater to come on by jiggling wires, but once it goes off again, it will not come back on. The heater is...

Furnace rheem criterion [ 1 Answers ]

Furnace blower fan and the pre blower fan come on at same time. And the ignitor won't light. Have to turn off power switch to stop both fans. I changed upper limit swith but still won't work. When it was working it was going great, returned and blower was running only but no heat. Thermostat...

Rheem criterion II gas furnace [ 1 Answers ]

It is now about 57 degrees in my house. My furnace just turned on but there was no ignition, no flame. I could hear the blowers running. Is my flame sensor bad or dirty? Or is it something else? How do I fix this? I have fixed my furnace before with a new flame sensor or something like that. I...

Rheem criterion II gas furnace [ 3 Answers ]

Have a rheem furnace and when it turns on it blows real hard something I read said it has a three or four speed motor just wondering if some one could help me change the wires to lower the speed of the motor

Rheem criterion furnace [ 3 Answers ]

My air went out yesterday and I don't what to do... the motor outside is not working but the inhouse fan is work air is coming out of the vent but it is not cool. This happened in the winter and we had the heat ignaitor replace... help?? it 98 degree today

View more questions Search