Ask Experts Questions for FREE Help !
Ask
    gooseneck's Avatar
    gooseneck Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 15, 2010, 08:33 AM
    Repair Manual for 2400 Monitor Heater
    No error code. When unit reaches set temp, cuts off & temp set & room lights flash. When room cools to set temp or below, unit refires OK and heats up to set temp but temp set & temp room continue to flash all the while. For this reason, I cannot program the unit. I have rebuilt older Monitor units in the past but would like to find a service/repair manual for this model before attempting a tear down. All responses welcome and thank you.
    bg1454's Avatar
    bg1454 Posts: 1, Reputation: 1
    New Member
    		  
    #2

    Mar 26, 2013, 07:58 AM
    I have a monitor 2400 heater we have replaced the fuel filter and checked all the lines and have fuel going to the heater but it will not light when I turn it on it gives me an E08 error can someone tell me what to do
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Monitor 2400 heater/error 13 [ 4 Answers ]

I have a 4 year oldmonitor 2400 which has been totally reliable until recently. I have been through the error 14 stage with dirty filters at the tank and at the heater as well as running out of fuel. This problem is error 13 where the unit fires up for approx 2 minutes then shuts down, I removed...

Monitor heater error code 13, how do I trouble shoot and fix heater? [ 3 Answers ]

My monitor heater is 3 years old and has never had a problem since installed. It is now giving an E 13 error code. Where should I start when trouble shooting? I have 2 other monitors that come off the same fuel supply line, this is the first in the series. Any idea where to start?

Repair Manual for TV [ 2 Answers ]

Does any know where to get repair manual for Hitachi 36Ux01s TV. I know what's wrong and what part I need. Need some hand holding to install the integrated circuit board when it arrives.

E13 code monitor 2400 why? [ 1 Answers ]

Hello, I need some help please.. I recently bought a 2400 series monitor heater second hand. I replaced my older 441 model so I used the same exhaust and intake and lift pump. After I installed the new unit I ran it for some time and it ran fine. Ran it two more times no problem. Then one day it...

View more questions Search