turned thermostat on, no ignitor, no flame, but blower comes on
red light blinks twice== pressure switch with inducer on
Any way to fix this without buying new part ?
Check out some similar questions!
Red light flashing on my gas furnace [ 1 Answers ]
My gas furnace is blinking red and continious, and on the back of the door its says that this means "internal control failture" so I need to know what that means. Is it one problem or a number of things I need to check? Help!
Furnace not firing up and shows no flashing light? [ 0 Answers ]
Hello My furnace has been acting up lately. The thermostat will call for heat and I hear the furnace trying to start up but is not blowing any hot air. After 15-20 secs it shuts down, waits for about 2 minutes and does the same thing. Then I switch it off and wait for 30 minutes or so. When I...
I am getting a continuous blinking red light from my gibson gas furnace [ 1 Answers ]
The blower comes on but no ignition and no flame to heat up my home. I see a continuous blinking red light. Please help..
The Ok light is flashing, the Flame light is off in the furnace circuit board [ 0 Answers ]
I have a Ruud Silhouette II Gas Furnace. The whole unit is turned off/on by a light like switch. The AC is working, but the heater is not. It appears that no gas is flowing to the burner. The PWR light is on, steady. The OK light is flashing; three times on, then off. The Flame light is off in...
Flashing red light on gibson furnace [ 2 Answers ]
My gibson furnace is not heating, when I looked inside, I saw a flashing red light and no flames. What could be the problem?
View more questions Search
Add your answer here.