Ask Experts Questions for FREE Help !
Ask
    chris95's Avatar
    chris95 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 9, 2011, 02:12 PM
    The pump would not run
    So I took the cover off and pushed the points down manualy and it took off checked thermostat seemed to be OK any ideal what to look at first to see why it will not turn on

Check out some similar questions!

For a pump (240 v 12.5 amp)what type wire do I run from the house to pump [ 2 Answers ]

Right now its uf wire but some goes threw flood zone and needs to be wet loc

Do I have to run pool pump 24/7 for first year? [ 3 Answers ]

Had a gunite pool installed, middle of June 2010. I'm running salt with DE filter. I was told by the installer that I had to run the pool pump 24/7 for the fist year but I've had other guys I know who have pools say that's nonsense. The installer says it has something to do with the plaster curing....

Two hp pump doesn't want to run. [ 1 Answers ]

I have a Fuse Box with two 30 Amp 250 Volts Time Delay Fuses. The Breaker Box, that feeds the Fuse Box, has two connected 50 Amp breakers (100 Amp total) for the incoming power. These feed one 20 Amp breaker for my flood light, one 20 Amp breaker for my two GFCI outlets, two connected 20 Amp...

I have a Carrier 24HNA636A310 Heat pump. Does the Heat pump mode run on both speeds? [ 0 Answers ]

I have a new Carrier Infinity 25HNA636A310 compressor. Does it run in both speeds when in heat mode

Heat pump will not run [ 0 Answers ]

I had a ruud heat pump and the compressor went bad. I now have a Duroguard 10 seer DPBC-036JA. In the AC mode the contactor chatters and if I bump the unit it kicks on and works normal, however it must be bumped (bang on side of unit) every time. In the heat mode the Thermostat clicks and the...

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.